MSPI ECC control register
| SPI_MEM_ECC_ERR_CNT | This bits show the error times of MSPI ECC read. It is cleared by when SPI_MEM_ECC_ERR_INT_CLR bit is set. |
| SPI_FMEM_ECC_ERR_INT_NUM | Set the error times of MSPI ECC read to generate MSPI SPI_MEM_ECC_ERR_INT interrupt. |
| SPI_FMEM_ECC_ERR_INT_EN | Set this bit to calculate the error times of MSPI ECC read when accesses to flash. |
| SPI_FMEM_PAGE_SIZE | Set the page size of the flash accessed by MSPI. 0: 256 bytes. 1: 512 bytes. 2: 1024 bytes. 3: 2048 bytes. |
| SPI_FMEM_ECC_ADDR_EN | Set this bit to enable MSPI ECC address conversion, no matter MSPI accesses to the ECC region or non-ECC region of flash. If there is no ECC region in flash, this bit should be 0. Otherwise, this bit should be 1. |
| SPI_MEM_USR_ECC_ADDR_EN | Set this bit to enable ECC address convert in SPI0/1 USR_CMD transfer. |
| SPI_MEM_ECC_CONTINUE_RECORD_ERR_EN | 1: The error information in SPI_MEM_ECC_ERR_BITS and SPI_MEM_ECC_ERR_ADDR is updated when there is an ECC error. 0: SPI_MEM_ECC_ERR_BITS and SPI_MEM_ECC_ERR_ADDR record the first ECC error information. |
| SPI_MEM_ECC_ERR_BITS | Records the first ECC error bit number in the 16 bytes(From 0~127, corresponding to byte 0 bit 0 to byte 15 bit 7) |